7 Ways to Fix the DATA_BUS_ERROR on Your Windows PC

The DATA_BUS_ERROR is a standard Windows error that brings up the dreaded blue display of loss of life (BSOD). It can seem out of nowhere and comes with the cease code 0x0000002E, which forces your system to restart. The DATA_BUS_ERROR is normally the results of a {hardware}, driver, and reminiscence downside, and you may normally repair it with the following seven troubleshooting steps.

1. Fix Any Hardware Issues
The 0x0000002E cease code can typically seem while you’ve put in new {hardware}. If that’s the case, you’ll be able to shortly resolve it by eradicating the recently-installed {hardware} and seeing if the error will go away.

If the error just isn’t the fault of latest {hardware}, it could possibly be that an previous one has malfunctioned. To discover out which {hardware} is malfunctioning, it helps to have a look at the System log of the Event Viewer.
To open the Event Viewer, hit the Win Key, sort Event Viewer, and click on on the app in the outcomes. Expand Windows Logs and click on on System to load the logs.

Right-click System and choose Filter Current Log.

In the Filter tab, choose the interval by which the DATA_BUS_ERROR occurred in the Logged dropdown (i.e., Last hour). Next, test the Critical, Warning, and Error test packing containers of Event Level and click on OK.

Look by means of the log to decide which gadget malfunctioned, after which take away or restore it.
MAKEUSEOF VIDEO OF THE DAY

2. Fix Driver Issues
If you are experiencing the DATA_BUS_ERROR after putting in a brand new or updating a driver, you need to attempt uninstalling it. Right-click Start and choose Device Manager. Then, right-click on the gadget with the new or up to date driver and select Uninstall gadget.

Then, test the Delete the driver software program for this gadget checkbox and click on on Uninstall.
Be cautious when doing this, as this implies the gadget will disappear from the checklist in Device Manager. You ought to solely do that when essential, as it may be tough to reinstall later, particularly if it is an inside part.
Related: How to Fix Corrupt Drivers on Windows 10

3. Fix Memory Issues
If you discover any indicators of defective RAM, you need to run a diagnostic check. Hit the Win Key, sort reminiscence in the Search field, and click on on Windows Memory Diagnostic.

Windows will now run some checks on your RAM. After the course of completes, the outcomes can be obtainable in the System log, and the easiest method to discover them is to carry out a search. Open the Event Viewer, right-click on System, and choose Find.
In the Find what textbox, sort MemoryDiagnostics-Results and click on Find Next. Then, shut the dialogue field to look at the logs.

If there are not any errors, RAM just isn’t the subject, however whether it is, you need to do the following:
Test the RAM modules: If you’ve got a couple of RAM module put in, take away all of them and see if the system can run with only one put in at a time. Whichever module causes the DATA_BUS_ERROR is the defective one, and you need to exchange it. Test the RAM slots: If all the RAM modules handed the check, it could possibly be an issue with certainly one of your slots. Place a stick in a single slot and see if the PC will perform usually and so on. If certainly one of the slots causes the 0x0000002E error, name a {hardware} professional to repair the slot or exchange the motherboard.

Doing these checks would require you to open up your pc. So in case you’re not expert in that division and afraid you will harm one thing, have a pc {hardware} technician do it for you.
Related: A Quick and Dirty Guide to RAM: What You Need to Know

4. Fix Hard Drive Issues
Bad sectors in your laborious drive could cause the 0x0000002E error. Luckily, Windows has the built-in CHKDSK utility. And you should utilize it to scan for and repair unhealthy sectors with a single command in Command Prompt.
To open Command Prompt, press Win + S and sort cmd in the Search field. Click on Run as administrator below the Command Prompt app in the search outcomes.

Then, sort chkdsk C: /f /r /x to run the CHKDSK utility.

Restart your pc and see if the DATA_BUS_ERROR continues to be occurring.

5. Update BIOS
Updating your pc’s BIOS can typically repair the subject, particularly if the system is new. How you go about doing this can rely on the producer of your PC. Here are some steps you’ll be able to observe to carry out a BIOS replace:

Download the newest BIOS replace from the assist web page of the PC producer’s web site. It can be a ZIP file. Extract the BIOS replace file onto a flash drive. Enter BIOS by going to Start > Power and clicking on Restart whereas holding Shift to boot into Advanced Startup Options. From there, head to Troubleshoot > Advanced choices > UEFI Firmware Settings and choose Restart to boot into UEFI BIOS. This technique will work in each Windows 10 and 11. Navigate to the UEFI firmware replace software to your motherboard and choose the BIOS replace file in the flash drive to start the replace.
Upon finishing the replace, your pc will restart, and you need to test if the DATA_BUS_ERROR will occur once more.
Related: How to Enter the BIOS on Windows 10 (And Older Versions)

6. Remove Malware From System
If malware infects your system, it could possibly trigger the 0x0000002E error when it corrupts essential system recordsdata. You can simply take away malware with a easy full system scan along with your antivirus software program. However, you need to make sure that you’ve got up to date the program earlier than doing the scan.

If you do not have antivirus software program put in, you’ll be able to carry out a system scan with the built-in Microsoft Defender. Head to Start > Settings > Update and Security > Windows Security and click on on Virus & risk safety.

Scroll down and click on on Scan choices.

Finally, Select Full scan and click on on Scan now. Because Windows Defender will do a deep scan, the course of can take longer than an hour.

7. Repair the Master Boot Record (MBR)
After eradicating malware out of your pc, you need to restore the MBR simply in case a virus corrupted it and led to the error. You can observe our information on fixing the grasp boot file and see if that resolves the DATA_BUS_ERROR.

Getting Rid of the DATA_BUS_ERROR BSOD
The DATA_BUS_ERROR causes main disruption to your enjoyment of Windows. If any of the steps talked about above did not work, you’d have to set up a recent copy of Windows to give your system a clear slate. But as soon as your repair any {hardware}, driver and reminiscence points, the error will almost definitely go away.

Windows 10 Won’t Boot? 12 Fixes to Get Your PC Running Again
Is your Windows 10 PC not booting? Use these useful ideas and fixes to restore your PC and get it to begin up once more.