How to properly install a RAM stick

Installing RAM into a gaming PC is a straightforward process. According to most PC builders, putting in a reminiscence stick is the best step concerned in placing a laptop collectively. Obviously, customers profit significantly from putting in additional reminiscence into their methods. However, there may be a restrict to how a lot RAM upgrades can profit total efficiency.

In 2022, 16 GB of RAM is greater than adequate for various kinds of builds. In truth, most video games is not going to profit from greater than 16 GB of reminiscence. However, content material creators and professionals can definitely make the most of the elevated flexibility of 32 GB of reminiscence. But for the typical consumer, something above 32 GB is a waste of cash, not less than for the following few years.

A information to putting in a RAM stick

As talked about earlier than, putting in a reminiscence stick is a easy job. Before getting began, customers will want the reminiscence stick they need to install and a #1 Philips head screwdriver. Users may maintain a piece of microfiber fabric useful.
Once they’ve the entire objects listed above, comply with the steps listed under to install a RAM stick effortlessly.
Step 1. Shut down the pc and unplug all cables from the system.
Step 1. Open the aspect panel of the case to achieve entry to the inside of the PC.
Step 2. Unplug the graphics card from the system.
Step 3. Unplug all energy connections from the motherboard.
Step 4. Unscrew the standoff screws and take the motherboard out of your case. Place it on a flat anti-static floor.
Memory slots on a motherboard (Image by way of 123RF)

Step 5. Locate the RAM slots on the motherboard. They are normally proper beside the CPU socket, typically to the suitable aspect of it. In the case of E-ATX motherboards, they’re on either side of the CPU socket.
Step 6. If older sticks are put in, customers could have to take away them from the system first. Users can unclip the plastic retention clips on both aspect of the RAM slots to get began. Some trendy motherboards could solely have one plastic retention clip.
Once the plastic retention clip is open, the reminiscence stick will pop up. If the motherboard has a single retention clip, customers can pull the stick out at this level. For motherboards with two retention clips, customers could have to open each of them earlier than pulling the stick out.
Step 7. With the retention clip(s) pulled out, customers can put a new stick into the motherboard slot. Users should then align the stick with the notch and gently push it in. Once the stick has been put in accurately, there might be an audible click on sound.

Step 8. Put the motherboard again within the system, reconnect all the ability cables, and boot the pc. The new reminiscence stick ought to pop up within the system info as properly.

The above steps will assist customers get by way of the method of putting in RAM with none points. To be on the protected aspect, customers ought to at all times verify whether or not the brand new reminiscence has been accurately put in on their PC utilizing the free utility CPU-Z. This software program will show all related details about the newly put in RAM, permitting customers to confirm whether it is working as anticipated.

Coming quickly!

Recommended For You